Learn about Mu2e-II: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 31: | Line 31: | ||
|- | |- | ||
| || 650 || MHz | | || 650 || MHz | ||
|- | |||
| Operation || 40 || wk/yr | |||
|- | |||
| Up time || 90 || % | |||
|- | |- | ||
!colspan="3" |Mu2e-II parameters | !colspan="3" |Mu2e-II parameters | ||
| Line 36: | Line 40: | ||
| Bunch frequency || 81.25 || MHz (assumes 1/2 of 162.5 available) | | Bunch frequency || 81.25 || MHz (assumes 1/2 of 162.5 available) | ||
|- | |- | ||
| | | Calibration, background, special runs || 30 || % | ||
|- | |||
| CE data || 70 || % | |||
|- | |||
| Mu2e-II efficiency || 100 || % | |||
|- | |||
| CE run time/yr || 1.5<math>\small{\times 10^{7}}</math> || s | |||
|- | |- | ||
| Duration of run || | | Duration of run || 4 || yr | ||
|- | |- | ||
| Total run time || 6<math>\small{\times 10^7}</math> || s | | Total run time || 6<math>\small{\times 10^7}</math> || s | ||
Revision as of 21:39, 13 September 2021
| Parameter | Nominal value | Units, Comments |
|---|---|---|
| PIP-II parameters | ||
| Beam energy (kinetic) | 800 | MeV |
| 1.28[math]\displaystyle{ \small{\times 10^{-10}} }[/math] | J | |
| Particles/pulse | 6.7[math]\displaystyle{ \small{\times 10^{12}} }[/math] | |
| I_average in pulse | 2 | mA (5 mA peak) |
| Pulse length | 550 | [math]\displaystyle{ \small\mu }[/math]s |
| Pulse rep rate | 20 | Hz |
| Bunch pattern | programmable | |
| Peak bunch size | 2[math]\displaystyle{ \small{\times 10^8} }[/math] | (5 mA) |
| Bunch length | 4 | ps |
| RF frequency | 162.5 | MHz |
| 325 | MHz | |
| 650 | MHz | |
| Operation | 40 | wk/yr |
| Up time | 90 | % |
| Mu2e-II parameters | ||
| Bunch frequency | 81.25 | MHz (assumes 1/2 of 162.5 available) |
| Calibration, background, special runs | 30 | % |
| CE data | 70 | % |
| Mu2e-II efficiency | 100 | % |
| CE run time/yr | 1.5[math]\displaystyle{ \small{\times 10^{7}} }[/math] | s |
| Duration of run | 4 | yr |
| Total run time | 6[math]\displaystyle{ \small{\times 10^7} }[/math] | s |
| Total linac reps | 1.2[math]\displaystyle{ \small{\times 10^{9}} }[/math] | |
| Extinction | 1[math]\displaystyle{ \small{\times 10^{-11}} }[/math] | [1[math]\displaystyle{ \small{\times 10^{-13}} }[/math] for 100x safety margin] |
| Beam power | 120 | kW (100 kW nominal) |
| Number of bunches/spill | 8 | (at 81.25 MHz) |
| Spill width | 100 | ns |
| Production target parameters | ||
| Material | ||
| Power deposition | kW | |
| Optimizable parameters for stopping target material | ||
| Aluminum stopping target | ||
| Spill period | 1693 | ns |
| Spills/linac rep | 27770 | approximate, at 20 Hz linac repetition rate |
| Protons/spill | 1.6[math]\displaystyle{ \small{\times 10^{9}} }[/math] | (5 mA) |
| POT | 5[math]\displaystyle{ \small{\times 10^{22}} }[/math] | |
| Stopped mu/p | 1.9[math]\displaystyle{ \small{\times 10^{-4}} }[/math] | rough estimate, TBC, assumes stopped mu/kW same at 800 and 8000 MeV among possibly other things |
| SES | <3[math]\displaystyle{ \small{\times 10^{-18}} }[/math] | |
| E(conversion e-) | 104.97 | MeV |
| tau(muon) | 864 | ns |
| Lead stopping target | ||
| E(conversion e-) | 94.9 | MeV |
| Tracker | ||
| Resolution at 100 MeV | ||
| Calorimeter | ||
| Material | ||
| Energy resolution | 5% | % (FWHM/2.36) |
| Time resolution | < 500 | ps |
| Position resolution | 10 | mm |
| Radiation dose | 10 | kGy/yr |
| [math]\displaystyle{ \small 1\times 10^{13} }[/math] | n/cm[math]\displaystyle{ \small{^2} }[/math] (total 1 MeV equivalent) | |
| Cosmic Ray Veto | ||
| Trigger/DAQ | ||
| Event size | 1 | MB |
| Tape storage | 14 | PB/yr |